Performance Characteristics
- suitable for 10 Gigabit Ethernet acc. to IEEE 802.3an
- Transmission performance: PL Class EA 500 acc. to ISO/IEC 11801; EN 50173-1
- surface housing can be retrofitted with a flip-up loss-proof, transparent label field
- the cables are terminated via IDC (LSA Plus) terminals with colour coding acc. to EIA/TIA 568A and B
- screw clamp for strain relief and shielding contact for incoming cables
- compact type for surface mounting with two RJ45 jacks parallel to the mounting level
- shielded version
- RJ45 jacks facing downwards
- installation cabling from top
- fixing by 2 screws 3.5 mm dia. max.
- plastic housing with snap-on cover
| Mechanical Characteristics | |
| Insertion force | ≤ 30 N |
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Material: housing | ABS |
| Material: insulators | PBT, ABS, PC |
| Material: PCB | FR4 |
| Material: PCB finish | tin plated |
| Material: contact spring | CuSn, spring steel |
| Material: contact spring finish | min. 0,8 µm Au on 1,2 µm Ni |
| Material: contact IDC termination | CuZn |
| Material: IDC termination finish | tin plated |
| LSA Plus: Cu conductor diameter | solid 0.41 – 0.64 mm AWG 26/1 – AWG 22/1 |
| LSA Plus: Wire diameter | 0.7 – 1.6 mm |
| Electrical Characteristics | |
| Contact resistance | ≤ 20 mΩ |
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Class EA 500 |
| Standards | |
| Connectors | IEC 60603-7-51 |
| Transmission Characteristics | |
| Category 6A (Component) for products Cat.6A | – |
| Class EA (Permanent Link) for products Cat.6A, Class EA 500 | ISO/IEC 11801, DIN EN 50173-1 |
| Class EA (Channel) for products Cat.6A, Class EA 500 | ISO/IEC 11801, DIN EN 50173-1 |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | for Class EA 500 |
